Setting up CyberGhost VPN on your iOS device involves several straightforward steps. Here's a concise guide based on your thought process:

• Visit the official CyberGhost VPN app on the App Store and download it.

2. Enable the App:

   Once downloaded, open the app and go to "Privacy" > "Open the app in new window" to access it without logging in.

3. Set Up Your Network:

   • Tap on "Network" and select the network where your device is connected (e.g., a Wi-Fi router or local network).
   • Add the network by selecting it and tapping "Confirm." Enter the correct IP address and click "Add."

4. Configure VPN Settings:

   • Go to "Network" > "Configure."
   • Choose your IP address from the list and select it as the server. Set the port to 443 (Wi-Fi) and choose "CyberGhost" as the VPN server.
   • Enable "Use public IP" if desired, and select your public IP address.

5. Test Your VPN:

   Connect to Wi-Fi and type URLs to test. The app should block blocked URLs and allow unblocked ones.

6. Use Local Network:

   If using a local network, tap "Network" > "Add Local Network," select the network, and configure the server port and IP.

Common Issues:

• If blocked URLs appear, it's normal to see blocked IPs. Use the IP to check if it was blocked.
• If you want to use a local network, ensure the server IP is different from the local network IP.

Additional Tips:

• Log in to the VPN after configuration for access.
• Check the app's help or support section for known issues, though you may have encountered them already.

By following these steps, you should have a functioning CyberGhost VPN on your iOS device.